MakerWorld
Hueforge & Lithophane
Voir le modèle
Shark 2
26
Téléchargements
25
Likes
9
Makes
Shark 2 hueforged Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #9 (0.8mm) swap to Beige At layer #14 (1.2mm) swap to Orange At layer #15 (1.28mm) swap to Yellow At layer #16 (1.36mm) swap to Jade White for the rest.
Michele MM3D publie également sur
424 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
