Thingiverse
Shelf Support / Bracket V2
di condruttoma
4.7k
Download
4.1k
Likes
2
Makes
For a matching pair just mirror the parts in your slicer.
I recommend rotating the "main support" so that it's essentially upside down with the dovetail slot sticking up in the air. (see picture)
For the "inlay" you'll want to print it on it’s side so the hexagons lie on the bed.
Go for min. 3 wall lines, and an infill of 20% or more.
Please feel free to post pictures of your colorscheme :)
Tolerances are 0,2 mm on all sides for the inlay, I printed it on a raft in order to avoid any surprises when inserting into main support. (elephant foot)
_________________________________________________________
Check out my newest design of a hand-cranked, spring loaded catapult :D
https://www.thingiverse.com/thing:5746831
I recommend rotating the "main support" so that it's essentially upside down with the dovetail slot sticking up in the air. (see picture)
For the "inlay" you'll want to print it on it’s side so the hexagons lie on the bed.
Go for min. 3 wall lines, and an infill of 20% or more.
Please feel free to post pictures of your colorscheme :)
Tolerances are 0,2 mm on all sides for the inlay, I printed it on a raft in order to avoid any surprises when inserting into main support. (elephant foot)
_________________________________________________________
Check out my newest design of a hand-cranked, spring loaded catapult :D
https://www.thingiverse.com/thing:5746831
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
