Thingiverse

Shelf Bracket

by tpower118

7.6k Downloads

6.4k Likes

25 Makes

Go to Model

A simple yet elegant shelf bracket, capable of holding pretty significant weight.

Measures 4" (102 mm) long on each leg and 0.75" (19 mm) wide.

I loaded it with about 50 lbs and it seemed to hold fine, using a couple of #6 x 2 in. wood screws into the studs in the wall. You'll also need a long screwdriver to access the screws through the holes in the bracket.

For the shelf part, I just bought an oak plank at Lowes and lightly sanded it.

I actually made this for a shelf so my cat could sit by the window.

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format