Thingiverse
Shelf Bracket
par tpower118
7.6k
Téléchargements
6.4k
Likes
25
Makes
A simple yet elegant shelf bracket, capable of holding pretty significant weight.
Measures 4" (102 mm) long on each leg and 0.75" (19 mm) wide.
I loaded it with about 50 lbs and it seemed to hold fine, using a couple of #6 x 2 in. wood screws into the studs in the wall. You'll also need a long screwdriver to access the screws through the holes in the bracket.
For the shelf part, I just bought an oak plank at Lowes and lightly sanded it.
I actually made this for a shelf so my cat could sit by the window.
Measures 4" (102 mm) long on each leg and 0.75" (19 mm) wide.
I loaded it with about 50 lbs and it seemed to hold fine, using a couple of #6 x 2 in. wood screws into the studs in the wall. You'll also need a long screwdriver to access the screws through the holes in the bracket.
For the shelf part, I just bought an oak plank at Lowes and lightly sanded it.
I actually made this for a shelf so my cat could sit by the window.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
