Thingiverse
Shelf Bracket
por tpower118
7.6k
Descargas
6.4k
Likes
25
Makes
A simple yet elegant shelf bracket, capable of holding pretty significant weight.
Measures 4" (102 mm) long on each leg and 0.75" (19 mm) wide.
I loaded it with about 50 lbs and it seemed to hold fine, using a couple of #6 x 2 in. wood screws into the studs in the wall. You'll also need a long screwdriver to access the screws through the holes in the bracket.
For the shelf part, I just bought an oak plank at Lowes and lightly sanded it.
I actually made this for a shelf so my cat could sit by the window.
Measures 4" (102 mm) long on each leg and 0.75" (19 mm) wide.
I loaded it with about 50 lbs and it seemed to hold fine, using a couple of #6 x 2 in. wood screws into the studs in the wall. You'll also need a long screwdriver to access the screws through the holes in the bracket.
For the shelf part, I just bought an oak plank at Lowes and lightly sanded it.
I actually made this for a shelf so my cat could sit by the window.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
