Thingiverse
Music
Voir le modèle
Shell Ocarina
6
Téléchargements
4
Likes
1
Makes
Bring some beach vibes to your playing with this shell ocarina!
Recommended Print Settings:
- Supports: Yes
- Material: Tested in PLA
- Support Type: Tree supports
- Threshold Angle: 20
- On build plate only: Enabled
- Layer Height: 0.2mm or finer for best detail, 0.4mm for general prints
- Infill: 15–25%
Recommended Print Settings:
- Supports: Yes
- Material: Tested in PLA
- Support Type: Tree supports
- Threshold Angle: 20
- On build plate only: Enabled
- Layer Height: 0.2mm or finer for best detail, 0.4mm for general prints
- Infill: 15–25%
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
