Shinigami Hueforge

Project: shinigami.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 186.67x250mm in sizeYou may print at higher layer heights below the Base Thickness of 0.4mmThe Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #646c74 PLA BambuLab Basic Gray Transmission Distance: 1.5 #080a0d PLA BambuLab Basic Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA Default White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Jade White At layer #6 (0.64mm) swap to Grey At layer #12 (1.12mm) swap to Black At layer #15 (1.36mm) swap to Red At layer #21 (1.84mm) swap to WhiteBorder Only Colors from here until the end. At layer #26 (2.24mm) swap to Red for the rest.