Thingiverse
ShredLights Brackets
von SilentException
9
Downloads
8
Likes
0
Makes
**15.04.2019 Update**
* Added new Rear/Motor bracket! Should work with trucks where the motor(s) are installed (usually rear). I say *should* because I didn't yet tested the design on my boards and also it is hard to predict if it will work for you because every board is different. Let us know if it works for your board and which. If needed, I can do adjustments.
**18.05.2018 Update**
* Few small changes to light holder part (just a bit narrower and 1mm shorter tip to tip).
* Added new dual bracket! Works great with wider trucks as the ones from TorqueBoards (DIYElectricSkateboard) or on LEIFTECH eSnowboard!
*(The dual bracket you can see on the image is milled out of 1.5mm carbon fiber plate and I manually filed the edges all around.)*
This is a CAD drawing of a brackets (holders) for ShredLights (lights for skateboards/longboards). Probably the best lighting system at the moment, check them out at [shredlights.com](https://shredlights.com/)!
I designed _standard bracke
* Added new Rear/Motor bracket! Should work with trucks where the motor(s) are installed (usually rear). I say *should* because I didn't yet tested the design on my boards and also it is hard to predict if it will work for you because every board is different. Let us know if it works for your board and which. If needed, I can do adjustments.
**18.05.2018 Update**
* Few small changes to light holder part (just a bit narrower and 1mm shorter tip to tip).
* Added new dual bracket! Works great with wider trucks as the ones from TorqueBoards (DIYElectricSkateboard) or on LEIFTECH eSnowboard!
*(The dual bracket you can see on the image is milled out of 1.5mm carbon fiber plate and I manually filed the edges all around.)*
This is a CAD drawing of a brackets (holders) for ShredLights (lights for skateboards/longboards). Probably the best lighting system at the moment, check them out at [shredlights.com](https://shredlights.com/)!
I designed _standard bracke
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
