Side spool mount

If you, like me, use this AMS riser as shown in the picture then you might also want this simple side spool mount. I designed it to utilize the metal spool mount comes with Bambu X1C. The metal spool mount already provides smooth interface for a spool to rotate. “Strength” profile is recommended so that the base part won't bend too much if a heavy spool is hanged. You can increase the infill percentage to further increase the strength. Non-printed materials:2 pcs M3 nuts2 pcs M3x6 screws2 pcs M3x10 screwsAssembly:Place the M3 nuts into the hexagonal holes on the backside of the base part.Screw the metal spool mount with the base part.Screw the trigonal part to with base part.It should hang on the top/left edge of X1C. I've trimmed the bottom of AMS riser so that the spool side mount can fit well. As shown in one of the pictures, you might also want to apply two piece of sponge so that the spool mount is firmly pressed by the AMS riser.