Thingiverse
Signal Generator
door marigu
14
Downloads
11
Likes
0
Makes
Small usefull ESP32 signal generator.
Fusion360 file included.
ESP32 code included as .txt file, just rename it to .ino and upload via Arduino IDE.
It uses ESP32 DAC pin(25) you can use 26 or both as well.
ESP32 - 25(DAC1) or 26(DAC2) PIN
Encoder pinout:
encoderPinA = 13,
encoderPinB = 27,
encoderButton = 15 // button PIN
OLED is using I2C
SDA(GPIO21)
SCL (GPIO22)
I have used Single Row Pin Female Header Socket Pitch 2.54mm connector for output, for GND, +3.3V, +5V and two DAC channel outputs.
Prusa i3 MK3
0.2
20 Infill
PLA
no supports
Fusion360 file included.
ESP32 code included as .txt file, just rename it to .ino and upload via Arduino IDE.
It uses ESP32 DAC pin(25) you can use 26 or both as well.
ESP32 - 25(DAC1) or 26(DAC2) PIN
Encoder pinout:
encoderPinA = 13,
encoderPinB = 27,
encoderButton = 15 // button PIN
OLED is using I2C
SDA(GPIO21)
SCL (GPIO22)
I have used Single Row Pin Female Header Socket Pitch 2.54mm connector for output, for GND, +3.3V, +5V and two DAC channel outputs.
Prusa i3 MK3
0.2
20 Infill
PLA
no supports
marigu publiceert ook op
72 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
