Silverback Gorilla HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Bambu Labs Black Transmission Distance: 0.4 PLA Sunlu HS Grey Transmission Distance: 0.8 PLA Bambu Labs Blue Grey Transmission Distance: 2.5 PLA Sunlu HS White Transmission Distance: 6.1This print uses 4 unique filaments Swap Instructions: Start with