Sim Racing Sequential Shifter

Took some inspiration from various sources and tried my hand at designing and building my own Sequential shifter for Sim Racing. The files "Spring Wall" and "Shaft Pin" should be printed with 100% infill as the wall is taking the force of the spring, and the pin is a smaller pin that is threaded to hold the rose joint in place. Everything else is up to preference.

I used 608 bearings in the handle for smooth rotation, and used M10 ball spring screws in the housing that fit into M8 Button head screws that are in the handle to give a mechanical feel as well as help with the resistance since I made due with a spring I found in a bun at work (Originally had ordered a blue die spring but blew through the spring wall at 50% infill so went with a lighter spring to be on the safe side. For microswitches I used ones that had a roller on the lever. Also used a USB encoder over an arduino for the fact is was only 2 microswitches, might in the future wire it into the handbrake I also plan to b