Simba

Simba Hueforge from the lion king.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x170.82mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA Brown Transmission Distance: 7.2 PLA Red Transmission Distance: 6.3 PLA Yellow Transmission Distance: 2 PLA g sand Transmission Distance: 2 PLA White Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #16 (1.36mm) swap to Red At layer #18 (1.52mm) swap to Yellow At layer #20 (1.68mm) swap to sand At layer #21 (1.76mm) swap to White for the rest.