This is a simple cleat design that can be printed without supports when it is printed upside down. It measures 80x23x15mm or about 3x1x5/16 inches. My intended purpose for the design is the securing of Sun Sail Shade ropes I will be installing on the rear deck of our house.
What you need to print this:BeginnerMedium confidence
Why?
no supports
Support-freeSingle piece
Supports0/3
Assembly0/3
Settings1/3
Bed size0/3
Post-process0/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
80 mm (Medium)
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Simple Cleat?
Any FDM printer should handle Simple Cleat just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 80 mm is recommended.
Does Simple Cleat need supports when printing?
No supports needed for Simple Cleat — it's designed to print clean off the bed.
What file format is Simple Cleat available in?
Simple Cleat is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Simple Cleat free to download?
Yes, Simple Cleat is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
Did you print this model? Sign in and share your make!
Thingiverse
