Simple Clock (Clock Components Kit-011)

I wanted a simple clock to hang on the wall. I maxed out the build volume of my P1S so the clock face is 250mm in diameter, which unfortunately won't fit on a smaller printer. However if you still want to print this on an A1 mini for example, you can easily scale the clock face. Scaling the hands will not work since they are press fit on to the clock kit components. I didn't want to use the ugly hands provided in the kit, so I made replacements for those too. However because the seconds hand has a tiny cylinder for the attachment to the mechanism, it couldn't print with a .4mm nozzle. And since that is what I'm using - and the most common - I instead opted to use the included seconds hand and merely glue it into the replacement hand. I also made a replacement for the little rubber spacer that goes in between the nut and the clock face. Assembly is pretty self-explanatory.AMS vs. No AMSThe .3mf has two different clock face plates. The first uses the AMS to switch filamen