Thingiverse
Simple EVSE mount
door Opajo
1
Downloads
1
Likes
0
Makes
To build my own EVSE wallbox to charge my Outlander PHEV I ordered a tiny EVSE module from https://shop.gwl.eu/Electric-Cars/EVSE-kit-for-EV-charging-station-cable.html?cur=1
Which came in a kit, including 12V power supply and 16A relais. All components are minimal sized to fit in a charging connector. But for use at home I wanted a wallbox with a fixed cable, so I decided to use an old wallbox from a defective device. I installed it together with a remote controllable WiFi KWh-meter. To fix the tiny components in the box I designed this mounting frame which holds all three components tight fit in place.
Which came in a kit, including 12V power supply and 16A relais. All components are minimal sized to fit in a charging connector. But for use at home I wanted a wallbox with a fixed cable, so I decided to use an old wallbox from a defective device. I installed it together with a remote controllable WiFi KWh-meter. To fix the tiny components in the box I designed this mounting frame which holds all three components tight fit in place.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
