Simple ITX Box

Since I needed a small and cheap Mini ITX computer case I designed one using boxmaker and some Inkscape magic for the ventilation holes.The box displayed on the pictures has been customized for a local elementary school by adding their logo on the front panel. The entire case was designed to be cut out of a single 600 mm x 300 mm sheet of 3 mm thick MDF

The case will hold a standard Mini ITX motherboard with either an onboard power supply or a picoPSU with a DC input. It also features mounting holes for a 2.5" drive, but make sure that this will fit with your motherboard. The ventilation holes are optimized for the motherboards I used, so you might want to check the optimal placement of those holes depending on your hardware.

you will also need the following hardware :
* a power button (and you might need to modify the hole in the front for your button)
* 8 x M3x6 screws for the motherboard (add 4 more for the hard drive if needed)
* 4 x M3x10mm standoffs

Just cut it