Simple Jet Engine Model

This is a simple jet engine model with a spinning rotor that you can display on your desk as a decorative piece. The project is divided into three boards, so you can choose the engine colors according to your preferences. To assemble the engine, you will need the following items:1. M3x25mm screw for mounting the rotor2. M3x15mm socket screws (2 pieces) for attaching the base3. 8x19x6mm bearing. If you don't have a bearing, you can use the pre-printed bearing found on "Plate 1," but your rotor will rotate with some resistance. Assembly is very simple: After printing the model, place the bearing in the body and secure it with a small bead of cyanoacrylate glue to prevent it from falling out. Next, insert the printed axle with the M3x25mm screw into the bearing from the back (photo 6). Then place the washer on the axle. Make sure the washer's collar is facing the bearing. This is important because inserting the washer backward will cause the rotor to rotate with resistance