Simple key holder

简易的钥匙挂钩（key holder）需自备：双面胶（可以先使用墙面无痕胶再使用3m双面胶粘连打印件）M3×8自攻螺丝（长度最短6，自攻螺丝方便，也可挂钩预装热熔螺母使用）（不需要零件的下载一体的版本的打印配置，已经涂色可自定义） 模型150mm支持A1mini，底部螺丝孔建议加支撑，事后拆除给螺丝头下沉空间如需使用转印版，可以修改打印底面，正面的悬空丑一点也没事，简单刮一下连挂钩的时候压进去就好了（拆除背面支撑） Simple key holder NEEDS:Double-sided tape (you can use wall non-trace tape first and then use 3m double-sided tape to attach the print)M3×8 self-tapping screws (minimum length 6, self-tapping screws are convenient, can also be used with preinstalled hot melt nuts) The 150mm model supports A1mini. It is recommended to support the screw holes at the bottom and remove them afterwards to provide room for the screw head to sinkIf you need to use the transfer plate, you can modify the bottom of the print, the front of the hanging ugly is nothing, simply scratch the hook when pressed into it）