Simple Lamp diffuser (KC007)

Hereby I present a simple and cozy light diffuser for the KC007 kit. This design consists of 2 pieces and snaps together. The light pucks have a nice fit in the base, so no adhesive is needed! These lights can be used to light up the inside of your tent or your house, the possibilities are endless! They can be controlled via the remote, or by just pressing the light itself. No support or additional hardware is needed! Just print and snap it together! There is a hole in the bottom of the base, which allows for pushing out the led with your thumb if you need the puck light for other purposes. 🔹Features:Simple & Sleek designcompatible with “Remote Controlled 16-color RGBW Puck Lights” (KC007)No AMS needed!Fits on the A1 Mini!Snaps togetherSturdyPrinted with PLALight up your tent, room or office! Controlled via included remote or via pressing the light🔹Dimensions:Outer diameter: 69.3mm (2.728 inch)Overall height: 120mm (4.724 inch)🔹Filaments used:Base: Bambu Lab PLA Matte CharcoalTop: S