Simple Lamp

This is a simple, two-piece desktop lamp design. The lampshade connects with the lamp base with four inset magnets, and is designed to use a hanging lantern cord.

Parts needed:

1. Hanging lantern cord. Make sure to use one with a threaded nut: https://www.amazon.com/gp/product/B088F4MWB1/ref=ppx_yo_dt_b_asin_image_o01_s00?ie=UTF8&psc=1
2. LED bulb
3. PETG/PLA filament
4. 10mm button magnets (x4) like this: https://www.amazon.com/gp/product/B091DXF4JJ/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&psc=1


Instructions:

1. Print the lampshade using a clear or light-colored filament. I used semi-clear PETG at about 20% infill.
2. Print the base with the flat side down. You WILL need to use supports (I suggest tree supports in CURA...they work amazing). I suggest a higher infill on this to ensure there is enough strength (around 35%).
3. Once printed, put two magnets in the base of the lampshade and two in the lamp base. Make sure to note the polarity so the magnets don't re