Simple Metal BLTouch & E3D V6

Simple metal upgrades for BLTouch and E3D V6

BLTouch bracket inspired by declinox, and just like his upgrade you need to cut off the mount hole for the original capacitive sensor. Use the old nut from the capacitive sensor to secure the bracket.

The E3D bracket is designed so that you can still use the old extruder (with washers since the hole slots are for M4); you still need to make a cylinder spacer if you use the original extruder.

Bonus fan shroud to fit the new height of the V6.

If you are interested with my extruder setup, I use:
E3D Titan Extruder (w/ bowden adapter) https://e3d-online.com/products/titan-extruder
Aluminium Titan motor mount https://www.aliexpress.com/item/32975860459.html

I only used the motor mount (with fins), removed the bottom plate then drill new holes on the printer to screw mount it directly.
I removed the pneumatic fitting on the bowden adaptor, this barrel is only for spacer between the V6 and the extruder.
I tapped the old screw mou