Simple mostly 3D printed generator

This generator was made for a physics project and heavily inspired by Tom Stanton's generator (check his yt video on his 2nd channel for more details, here: Printed with 0.4mm nozzle and 0.2mm layersNotes:You'll need some small rectangular magnets for this generator (64 x 10mm x 5mm x 2mm magnets, you can find them here: https://www.aliexpress.com/item/1005001614564310.html)You'll also need a coil of 0.2mm copper wires (I bought 100m), which can be found here: https://www.aliexpress.com/item/1005003419270657.html?spm=a2g0o.order_list.order_list_main.16.4e3e1802M5wFNJYou'll also need some super glue to stick the rods in place (print all rods horizontally for max strengthWhen making the coils just remember to use a lighter to burn off the enamel at the ends of the coils (or else it won't conduct)In my generator I only printed 2 shells and 2 gears (resulting in a 1:25 gear ratio) and rotated it at 80 rpm with a motor. It gave about 3.8 peak mv per loop or 2.68mv AC per