Simple Spoolholder

Simple Spoolholder

Designed to be assembled with minimum additional parts needed.

- Parts to print:
2x Spoolholder_body
4x Spoolholder_wheel

- Parts to assemble:
smooth rod diam. 8mm (cut the rod into four 30mm long pins)

- Assembly:
1. Make sure the wheels are loose on the pins (they work as bearings)
2. Make sure the rod sits tight in the body (if not you can glue them in place after step 5)
3. Put the wheels in the gap of the body
4. Insert the the pins
5. Test if all wheels run smooth




- If you make this part please show me your result or leave a comment…..
Have fun!