Simple Star Light

This is a simple star-shaped lamp for the wall. You may need to modify the small switch holder. I designed it with a fairly large tolerance for rotation, but it depends on your printer, and it might be worthwhile to adjust the size of the circle at the end of the axis to fit snugly into the hole in the star, eliminating the need for glue. Do not use supports when printing the switch holder; it's unnecessary.Here's what you'll need for assembly5-9mm wide 5V LED strip that can be cut (please note, 5V, not 12)Battery holder for 3 AAA batteriesMicroswitch (note: a switch, not a push button)Red wireA small piece of stringAssembly stepsGlue the battery holder in place.Thread a string through the small circular hole in the switch holder and tie a knot.Solder two red wires to the microswitch (one to the contact in one corner, the other to the middle one next to it).Insert the microswitch into the square hole in the holder, ensuring that the soldered wires do not touch the contacts, as this wou