Thingiverse
Simple Triangle "Vase"
von FilamentCorner
13
Downloads
9
Likes
0
Makes
I was trying unsuccessfully to get the thingiverse exporter to work from VECTARY. I want to share this model though, so I am uploading it myself.
I started playing around with Vectary about a day ago and find vases fun to make with the software. I call this a "Vase" Because you have to actually use a vase mode to turn it into a vase. Most slicers have a mode like this, cura is the slicer I used. The benefit to letting you use vase mode is that you decide how thick you want the walls to be, rather than me setting a predetermined thickness. I use 3 shells or 1.2mm thick walls, because I am running a 0.4mm nozzle. I did try to slightly twist the vase, not sure if it's easy to notice the slight twist.
As always I would really appreciate it if you guys could leave a make any feedback you can think of. Thanks for reading!!!!
I started playing around with Vectary about a day ago and find vases fun to make with the software. I call this a "Vase" Because you have to actually use a vase mode to turn it into a vase. Most slicers have a mode like this, cura is the slicer I used. The benefit to letting you use vase mode is that you decide how thick you want the walls to be, rather than me setting a predetermined thickness. I use 3 shells or 1.2mm thick walls, because I am running a 0.4mm nozzle. I did try to slightly twist the vase, not sure if it's easy to notice the slight twist.
As always I would really appreciate it if you guys could leave a make any feedback you can think of. Thanks for reading!!!!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
