simple usb camera case

A simple protective USB camera case.

Dimensions: 14mm * 50mm * 50mm

- 4 M2 screws to mount the camera to base.
- 4 M3 screws to mount the cap.
- 4 M6 mount holes.
- Use `camera-mount-case2-cap-larger-hole.stl` if you don't want to remove the small lens.

Now with a part to hold a Adafruit USB C breakout board.

- 2 M2.5 screws to mount the board.
- 2~4 M3 screws to mount the additional part.