Skeleton Cat

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 112.73x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA Bambu Basic Black Transmission Distance: 0.1 PLA BambuLab Basic Blue Gray Transmission Distance: 2.6 PLA Bambu Basic Light Gray Transmission Distance: 1.1 PLA+ Esun Bone White Transmission Distance: 4.9 PLA Bambu Basic Jade White Transmission Distance: 6.3This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #14 (0.68mm) swap to Blue Gray At layer #21 (0.96mm) swap to Light Gray At layer #24 (1.08mm) swap to Bone White At layer #32 (1.4mm) swap to Jade White for the rest.