Skeletor

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 110.18x150mm in size  You may print at higher layer heights below the Min Depth of 0.72mm  The Max Depth is 2.8mm and the Actual Depth is 2.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Kexcelled Purple Transmission Distance: 4.5 PLA Kexcelled Fluorescent Yellow Transmission Distance: 8 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Purple ( I used red but don't mind me)  At layer #16 (1.36mm) swap to Yellow for the rest.