Slice Capsule

The Slice Capsule with a couple of caps. Screw-caps are about as secure as it gets for a 3D-printed capsule. This Capsule is a shorter version of the Slice Capsule that will be released soon, the caps are compatible with all of the Capsules. Let's first look at the caps. There's the Voronoi cap (printed in blue PETG), the Striped cap, Circular cap, and of course the Pixel cap.

Back to the Slice Capsule, this is the first and shorter Slice Capsule, the next taller one will be released soon and will be available on my Patreon page.

Printing tips:

All the other caps and Capsule need no support, printed in 0.16mm with a 0.4mm nozzle, there is plenty of tolerance for the caps to be printed in different slicer variations! The cap prints take more-or-less 1h 15min and the Capsule about 2h. I designed the Voronoi Cap for the Voronoi Capsule but of course, they can be mixed and matched to any cap/capsule!

Thanks

Steve