Thingiverse
Slide Switch using 20mm Microswitch
by peaberry
245
Downloads
204
Likes
1
Makes
This converts a small microswitch into a slide switch. It's designed to suit a 20mm wide microswitch (20mm x 10mm x 7mm / 0.78" x 0.4" x 0.3") with 2.5mm diameter mounting holes.
The overall size of the printed switch body is 40mm x 30mm x 15mm, and it has two 4mm mounting holes, which would be suitable to mount directly to 2020 extrusion. The top can be secured with M3 screws and nuts, and there's also a 4mm hole in one side for cable access.
The overall size of the printed switch body is 40mm x 30mm x 15mm, and it has two 4mm mounting holes, which would be suitable to mount directly to 2020 extrusion. The top can be secured with M3 screws and nuts, and there's also a 4mm hole in one side for cable access.
peaberry also publishes on
7 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
