sliderbar case
von darkspeedy26
1
Downloads
0
Likes
0
Makes
THIS IS A WORK IN PROGRESS
!!! its possible that the screw holes are in the wrong place !!!
This is a cover for the sliderbar project.
In the source file (fusion360) you can change parameter to 153 for the 100mm slider and 113mm for the 60mm slider
uploaded STL's are for the 60mm and 100mm versions
The current design should click in place, but the tabs break. This should be reworked with actual nuts and bolts, so they dont break. Alternatively, you could glue it in place if you hate yourself. Clearance not guaranteed.
!!! its possible that the screw holes are in the wrong place !!!
This is a cover for the sliderbar project.
In the source file (fusion360) you can change parameter to 153 for the 100mm slider and 113mm for the 60mm slider
uploaded STL's are for the 60mm and 100mm versions
The current design should click in place, but the tabs break. This should be reworked with actual nuts and bolts, so they dont break. Alternatively, you could glue it in place if you hate yourself. Clearance not guaranteed.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!