Slim Vectrex Controller

Slim Vectrex controller with same length and width as the original. Uses 18mm Sanwa buttons and commonly available 10K potentiometer joystick that can be found on Aliexpress or Adafruit. Two strain relief sizes are included: 4.5mm for using a repurposed Sega Genesis/Mega Drive controller cable or 5.2mm if using off the shelf 9 conductor 28AWG cable. Cable is super glued into the strain relief and just a dab should be enough. Uses 3mm flat machine screws of 12mm length. Easy to print and supports are not required.