small racer

Small Racer

Convert your stock Flsun delta to the cutest Direct Drive extruder to date!
Only challenge is making the plate to hold heatbreak under effector, which is also effective at dissipating heat even without blowers. Print has threads but you'lll need M7 tap for the plate. Drilling template for QQS and SR included.

things you'll need:

[E3DV6 bimetal heat break](https://www.aliexpress.us/item/3256805807607987.html)
[Nema 14 Pancake motor](https://www.aliexpress.us/item/3256807442033018.html)
[24v 3010 axial fan](https://www.aliexpress.us/item/2255800071978285.html)
[clone BMG gearset](https://www.aliexpress.us/item/3256805442986544.html) or from the the stock BMG extruder
[metric tapping tool](https://a.co/d/cmS5cUl)
[PC4-M6 fitting](https://a.co/d/1tVsL4e)
30x30mm alum plate
m3 screws

fan.stl included if you wanted to mount those ugly 4010 blowers =) Print front.stl 100% infill on its side without supports,
Let me know when you made it.