Smart Nanoleaf Replica - Diffuser

This is a 3-D-Printed diffuser for the "Smart Nanoleaf Replica" wich can be found here:
https://www.thingiverse.com/thing:3354082

Thank you Surrbradl08 for this great job!

You can find his other projects here:
https://www.thingiverse.com/surrbradl08/designs

----------------------- Printer settings (Cura 4.11.0) -----------------------------

- Resolution: 0.2mm
- Nozzle Temp.: 235°C
- Bed Temp.: 76°C
- Infill: 100%

----------------------- Printing hints -----------------------

- Level your bed as exactly as you can!
- If your printer has "Autoleveling" --> Disable it in your G-Code (G29)
So you can print all diffusers in one row. But only one in time.
- Watch the first lines and adjust your bed manually, if the layer is to thick or thin.
- When theprint is finished wait for 2-3 minutes until you peel your diffuser from the bed.
- Use a clean/new nozzle
- Printing Time is about 35 minutes.

---------------------- Bill of Material (Affiliate Links) ------