Smart Nanoleaf Replica Diffuser

This is a 3-D-Printed diffuser for the "Smart Nanoleaf Replica" wich can be found here:
https://www.thingiverse.com/thing:3354082

Thank you Surrbradl08 for this great job!

You can find his other projects here:
https://www.thingiverse.com/surrbradl08/designs

----------------------- Printer settings (Cura 4.11.0) -----------------------------

- Resolution: 0.2mm
- Nozzle Temp.: 235°C
- Bed Temp.: 76°C
- Infill: 100%
- All other settings are "Cura-Default"

----------------------- Printing hints -----------------------

- Level your bed as exactly as you can!!!(!)
- If your printer has "Autoleveling" --> Disable it in your G-Code (G29)
So you can print all diffusers in one row with the exactly the same bed level.
- Watch the first lines and adjust your bed manually, if the layer is to thick or thin.
- When the print is finished wait for 4 minutes (not longer) until you peel your diffuser off the bed.
- Use a clean/new nozzle
- Printing Time is about 35 minute