snapmaker heatbed cable angle

Snapmaker 2.0 A350 cable bed 45 degree angle

Snapmaker seems to have a problem with the cable from the heated bed, that breaks because bending the way is. so I have a re design with a 45 degree angle so it bends on the flat side not the short side.

You need:
4 bolts M4
4 screws M4 x 8

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/lhGcrCouhCc

remix from https://www.thingiverse.com/thing:4707519