SNOWBALL

SNOWBALL Working Notes : • The files are hi resolution and might take a while to load and slice. MODEL SPECIFIC SETTINGS • Support FREE • 10-15% infill • 2-3 wall line ESTIMATED AVERAGE PRINT TIME 100% SCALE 0.2 MM : 3 HRS 0.12 MM : 4 HRS SCALING • THE MODEL CAN BE SCALED DOWN UPTO 70 % • RECOMMENDED MINIMUS SCALE : 85 % ⚠️MELS 3D LABS GENERAL MODEL SETTINGS & TROUBLESHOOTING⚠️ ⚠️ Note⚠️ • If Slicer errors and warnings appear, they should be ignored as they are part of the reverse engineering protection. Models will slice and print correctly despite these warnings and errors. Be sure to check the slicing preview to confirm a successful slice. • Model errors and warnings should not be repaired. Please do contact us for any suggestions to be consider on future releases or modifications. • In the event of first layer Mis print, gaps, use the cut tool in the slicer and cutoff 0.05-1mm from the model. • The Downloaded Zip folder may have different versions such as V1, V2, V3... It is recomm