Snowman - Hueforge

Project: Snowman.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 2.48mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 1This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #15 (1.2mm) swap to Blue Gray At layer #20 (1.68mm) swap to Dark Blue At layer #23 (1.92mm) swap to Jade White At layer #27 (2.24mm) swap to Red for the rest.