solid bed spacers with bolts

OK, So really this is with Hex Nuts. Not Bolts.

The solid spacers that I remixed this from used a standard metal part that I found to be too expensive. So I tried just using some 5/16 inch-18 hex nuts. Sill press fit into the ABS spacers. I just use a table vice to press them in. Works great

I also remixed the stress relief to be a big higher and stronger.

I added a camera mount arm to one of the spacers so you can mount a PI CAM to the bed, makes the image stay centered though it does woble a bit.

Camera stuff was oritionally here:
https://www.thingiverse.com/thing:3079477

Parts Needed:
12 (3 for each spacer) 5/16in-18 Hex Nuts.
I am using Everbilt PN 328 639.
a bag of 25 costs around $2.50 at Home Depot.
https://www.homedepot.com/p/Everbilt-5-16-in-18-tpi-Zinc-Plated-Hex-Nut-25-Piece-per-Bag-802354/204274092