Thingiverse
Solidoodle Bed Stabilizer
von OneMoreCast
49
Downloads
26
Likes
1
Makes
EDIT: Some people had problems due to printer setup and needed 2 long arms or 2 short and also wanted parts broken up...I've included two pairs of short and long, and redesigned blocks with larger rod holes and just single hole for screw (2 wasn't needed )
This will work for SD 2,3,4 and apprentice. The left arm is shorter to allow the door on the 4 to close fully. You will lose about 20-25mm in the z axis. Makes bed rock solid, the springs will still allow bed to move but as for frame shacking or vibrating....zip, zero, nada
This will work for SD 2,3,4 and apprentice. The left arm is shorter to allow the door on the 4 to close fully. You will lose about 20-25mm in the z axis. Makes bed rock solid, the springs will still allow bed to move but as for frame shacking or vibrating....zip, zero, nada
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
