Solo Leveling Choi Jong-In

Solo Leveling Choi Jong-InPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113.39x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 4mm and the Actual Depth is 2.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA Sunlu Skin Beige Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Orange At layer #23 (1.92mm) swap to Skin Beige At layer #25 (2.08mm) swap to Yellow At layer #26 (2.16mm) swap to Ivory White for the rest.