Something to level X-axis???

This Item was printed in: REAL-Filament's Light Blue PLA ø2.85.

*You need to print at least 2 of these things to use it.*

just look at the pictures for how it was used, it's to level the X-axis.

Print Settings
Quality
Layer height: 0.2mm

Shell
Wall Thickness: 0.8mm
Top/Bottom Thickness: 0.8mm

Infill
Infill Density: 10%
Infill Pattern: Grid.
Infill Overlap Percentage: 20%
Skin Overlap Percentage: 20%

Speed
Print Speed: 70mm/s.
Travel Speed: 120 mm/s.

Support
Enable Support: No

Build plate Adhesion
Build plate adhesion type: None.