Thingiverse
Electronics
Model downloaden
Sonoff Basic switch din rail mount
137
Downloads
99
Likes
0
Makes
I designed this little bracket to let me mount a Sonoff Basic wifi switch to a 35mm din rail.
Mount the Sonoff to the din rail bracket with (2) #4 sheet metal screws that are 1/4" long.
After the Sonoff is mounted to the bracket you can snap it in place on a din rail from the front.
It won't come off the same way. You will need to unscrew the Sonoff from the bracket.
Then if you still need to get the bracket off the din rail you can flex it a little and it will come off that way.
https://youtu.be/mLYcEiFPLYo
Printed in ABS .2 layer 25% infill
Mount the Sonoff to the din rail bracket with (2) #4 sheet metal screws that are 1/4" long.
After the Sonoff is mounted to the bracket you can snap it in place on a din rail from the front.
It won't come off the same way. You will need to unscrew the Sonoff from the bracket.
Then if you still need to get the bracket off the din rail you can flex it a little and it will come off that way.
https://youtu.be/mLYcEiFPLYo
Printed in ABS .2 layer 25% infill
Old-Steve publiceert ook op
1 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
