Sorting Hat Straw Buddy

Straw Buddy - Sorting Hat inspired Straw Buddy. Profiles contain 2 sizes both standard 8.6 mm straw hole size and larger 10.3 mm hole size. The holes are on the model as a negative modifier. DO Not move the modifier or it will not slice the hole in the correct place. When you slice the project, you will see the hole in place of the modifier. If you need a different sized hole, You can change the size of the negative modifier by clicking on it and selecting the scale button on the top of the slicer. The 8.6 mm size fits most standard straws. The 10.3 mm fits larger of the generic straws such as Stanley straws. Anything larger and you may need to adjust the size of model as well to prevent thin walls. The print profiles provided are optimal while still using a more common 0.4 nozzle. Some adjustments are made to improve quality of small details such as lower top surface line width. Of course, you can also use lower layer heights or use smaller nozzle for higher quality prints, but it wou