Space Bookmark

My very first bookmark! There is a negative shape in the print that allows for a hole on the top to put a tassle. It can be removed before slicing if you don't need it. Project: bookmark.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50.06x200mm in sizeYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 2.5mm and the Actual Depth is 2.2mmFilaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA Overture Matte White Transmission Distance: 3.7This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #15 (1.28mm) swap to Red At layer #18 (1.52mm) swap to Orange At layer #22 (1.84mm) swap to Savannah Yellow At layer #24 (2mm) swap to White for the rest.