space bookmark

Boost Meplease follow this: slice first:point 1: reduce only x and y axes and not the z axe.point 2: slice the bookmark first : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150*70mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA Kingroon Orange Transmissio