space bookmark

please follow this: slice first: point 1: reduce only x and y axes and not the z axe. point 2: slice the bookmark first : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150*70mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Kingroon Orange Transmission Distance: 4.6 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #11 (0.96mm) swap to Orange At layer #19 (1.6mm) swap to White for the rest. To purchase a commercial license and sell my creations, access to my KO-FI SPACE Alternatively, make a small donation here ko-fi https://ko-fi.com/ziakat