SpaceCatChristmas

 The Model is 200x200mm in size. You may adjust the X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic White Transmission Distance: 6 This print uses 4 unique filaments. You may substitute as needed. Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Beige At layer #12 (1.04mm) swap to Brown At layer #14 (1.2mm) swap to White for the rest.