Thingiverse
Spectrometer 3.0 Modifications
door programmer1200
3
Downloads
2
Likes
0
Makes
These designs are for Public Labs Spectrometer 3.0 , I just wanted to design a few upgrades and try to help make the machine better and the community behind it.
Prism.Cameramount and cuvetteholder will both need support printed with them
Magnet sized used was 3mm x 9.5mm
Cuvetteholder will need a 2 small thin slivers of steel attached to the side that goes against the spectrometer , this way it can attach to the magnets. ( photo provided)
My designs might not be the exact size so a small amount of sanding might be needed.
Prism.Cameramount and cuvetteholder will both need support printed with them
Magnet sized used was 3mm x 9.5mm
Cuvetteholder will need a 2 small thin slivers of steel attached to the side that goes against the spectrometer , this way it can attach to the magnets. ( photo provided)
My designs might not be the exact size so a small amount of sanding might be needed.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!